Workplace Safety Instruction: Obligation, Frequency and Evidence
Digital Airways·

Safety instruction is mandatory for all Swiss employers. Under Art. 6 VUV, everyone working in the business must be informed and instructed about the hazards of their work and protective measures, on starting, whenever working conditions change significantly and again where necessary. The law prescribes neither a fixed interval nor a signature. You should still be able to prove it.
This article covers the legal basis, the occasions and content of safety instruction, how to handle temporary staff, contractors and apprentices, and how to make sure instruction is understood and evidenced. The role of the safety officer is explained in our article on safety officers and KOPAS.
The legal basis in Switzerland
The word Unterweisung, the German term for safety instruction, does not appear in the Ordinance on Accident Prevention (VUV). The VUV speaks of information and guidance, Suva and EKAS speak of Instruktion, and in Germany the same thing is called Unterweisung.
The central provision is Art. 6 VUV. The employer ensures that everyone employed in the business, including employees of other businesses working there, is adequately and appropriately informed and instructed about the hazards of their work and the workplace safety measures. The employer also informs them about the tasks of the workplace safety specialists active in the business and ensures that the measures are followed. Information and instruction take place during working hours and must not be at the employees’ expense.
Further provisions add to this duty.
| Provision | What it means for safety instruction |
|---|---|
| Art. 5 VUV | The employer provides reasonable and effective personal protective equipment (PPE) and ensures it can be used as intended at all times |
| Art. 8 VUV | Work involving particular hazards may only be assigned to employees trained for it. Anyone carrying out dangerous work alone must be monitored |
| Art. 9 VUV | Where several businesses work at the same workplace, the employers agree on arrangements and inform each other and their employees about hazards and measures |
| Art. 10 VUV | Towards hired-in workers, that is temporary staff, the same duties apply as towards your own employees |
| Art. 11 VUV | Employees follow the safety instructions, use the PPE and report defects they cannot remedy themselves |
| Art. 5 ArGV 3 | The same duty to inform and instruct applies to health protection, explicitly including physical and psychological hazards |
| Art. 19 ArGV 5 | Young workers are informed and instructed by a competent adult, and their parents are informed about hazards and measures |
For PPE, providing it is therefore not enough. Whoever wears it needs to know when and how. The VUV explicitly names instruction on the use of PPE in Art. 11e as a topic on which workplace safety specialists advise the employer.
In the ASA system under EKAS guideline 6508, «training, instruction and information» is one of ten points of the company safety system. On its page on the ASA guideline, training, instruction and information (in German), Suva summarises three principles for supervisors.
- Train employees systematically and document the training and instruction carried out.
- Assign work involving particular hazards only to employees who have the relevant training.
- Introduce new employees and temporary staff carefully to their area of work.
Suva also recommends a training and instruction plan covering all training activities in the business. When a business must additionally call in workplace safety specialists is explained in our article on EKAS guideline 6508 in SMEs.
When you must instruct
Art. 6 VUV and Art. 5 ArGV 3 name three occasions.
- When an employee starts, before the first piece of work. According to Suva, new employees have a 50 per cent higher accident risk in their first six months than experienced colleagues.
- Whenever working conditions change significantly, for example with new machines, work processes or substances, after building work, when someone moves to another workplace and when the hazard identification brings new findings. After an accident or near miss, renewed instruction is also advisable.
- Repeated where necessary, because knowledge fades and rare procedures such as evacuation are quickly forgotten.
The law does not set a fixed repeat interval. You decide how often «where necessary» is, based on the hazards. The greater the risk and the rarer the task, the shorter the interval. Many businesses repeat the basic instruction once a year. Also ask your industry solution which intervals it recommends, and record the interval for each instruction in writing.
What safety instruction should cover
The content follows from your hazard identification. Good instruction is tailored to the workplace and covers these topics.
- Hazards of the work, as specifically as possible, with examples from your own business.
- Protective measures and safety rules, such as barriers, access rules, permits and work instructions.
- PPE, meaning which equipment is mandatory when, and how to put it on, check it and look after it.
- Behaviour in an emergency, with alarm, escape routes, assembly point, first aid and the people responsible.
- Reporting defects and near misses, because under Art. 11 VUV employees must remedy defects or report them immediately.
- Contact persons, meaning who is responsible for workplace safety in the business and what the specialists called in do.
- Health protection, such as ergonomics, noise, skin protection and psychological strain under ArGV 3.
If Suva has published Vital Rules for your activities, they belong in the instruction too. Keep each unit short and practical. Several short units with images and an exercise at the workplace stick better than an hour of slides.
Who instructs
Responsibility always lies with the employer. The instruction should be given by someone who knows the work, the hazards and the protective measures, usually the direct supervisor.
The safety officer or KOPAS supports line management, prepares content, checks effectiveness and keeps the evidence up to date. What this role looks like day to day is shown on the page for safety officers. For specialist topics, call in experts, for example from your industry solution or the manufacturer of a machine.
If the employer assigns specific workplace safety tasks to an employee, under Art. 7 VUV the employer must train that person appropriately and give clear instructions and authority. Responsibility still remains with the employer.
Temporary staff and contractors
Temporary staff fall through the gaps particularly often. Under Art. 10 VUV you have the same duties towards hired-in workers as towards your own employees. The host business knows the hazards on site and therefore instructs at the workplace. Clarify with the staffing agency in advance what basic knowledge the person brings and who provides the PPE.
For contractors, two provisions apply. Art. 6 VUV explicitly includes employees of other businesses working on your premises. Art. 9 VUV requires the employers involved to agree on arrangements and inform each other about hazards and measures. If you commission third parties for maintenance, delivery of work equipment or the design of work processes, you must explicitly draw their attention to the workplace safety requirements in your business.
A short safety briefing before entering the site, confirmed by every external person, has proven its worth, from service technicians to visitors in production. How this works at reception without paper is shown on the page on visitor management.
Apprentices and young workers
For employees under 18, additional rules apply under the Youth Employment Protection Ordinance (ArGV 5). Under Art. 19 ArGV 5, a competent adult must adequately and appropriately inform and instruct young workers, in particular on safety and health protection. After they join, the employer hands them the relevant rules and recommendations and explains them. The employer also informs the parents or legal guardians about working conditions, possible hazards and the measures taken.
Dangerous work is in principle prohibited for young workers. In vocational education, the training ordinances can provide for exceptions, combined with accompanying safety measures in the annex to the training plans (Art. 4a ArGV 5). Host companies follow these measures and document the related instruction.
Checking understanding
The VUV requires instruction that is «adequate and appropriate». An attendance list does not prove that. Whether instruction has got through only shows when the person can repeat and apply what they have learned.
Proven methods are these.
- Comprehension questions at the end of the instruction, with a defined pass mark.
- Demonstrate and repeat at the workplace, especially for machines and putting on PPE.
- Questions in conversation, phrased openly, such as «What do you do when the alarm goes off?».
- Observation in daily work during inspection rounds and spot checks.
Pay attention to language as well. Instruction that the person cannot understand linguistically is hardly appropriate.
Evidence and documentation
The VUV does not prescribe a particular form. Suva, however, explicitly recommends documenting training and instruction. Under EKAS guideline 6508, businesses with particular hazards must evidence their measures, very small businesses with simple means such as training documents and minutes. During an inspection by Suva or the cantonal labour inspectorate, and at the latest after an accident, the question arises whether the person concerned had been instructed.
Meaningful evidence contains this information.
| Item | Why it matters |
|---|---|
| Topic and content with version | shows what the instruction covered, even after a change |
| Date | proves the timing, for example before the first piece of work |
| Person giving the instruction | shows that a competent person instructed |
| Participants | with name and role, including temporary staff and contractors |
| Result of the comprehension check | proves that the content was understood |
| Confirmation by participants | by signature on paper or digitally |
| Next repeat due | makes visible when instruction is due again |
Keep this information in one place, searchable by person and topic. Then during an inspection you can quickly show who was instructed on what and whose repeat is overdue.
Common mistakes
- Once on joining, never again. The repeat gets lost until an accident brings it back to mind.
- Signature without understanding. A signed list proves attendance, not knowledge.
- Gaps for temporary staff, contractors and apprentices. Those who know the business least are the most likely to be forgotten.
- Instruction in free time. Art. 6 para. 4 VUV requires working hours, including for instruction on a mobile phone.
- Outdated content. New machines appear in the hazard identification but not in the instruction.
- Scattered evidence. Lists in different binders can hardly be evaluated during an inspection.
How the Safety App handles safety instruction
The Safety App by Digital Airways is workplace safety software for Swiss SMEs. Its safety instruction software covers the whole process, from content to evidence.
- Content in any format. Instructions with text, images, PDF and video. A skip lock makes sure videos are actually watched.
- Draft with AI. From a video or a web page, the AI creates a draft for the instruction. You review it, adjust it and approve it.
- Assignment and repetition. You assign instructions to people or groups as mandatory and set the repeat interval. Reminders and escalation run automatically.
- Comprehension questions. At the end participants answer questions, you set the pass mark. The AI suggests the questions from the content, you approve them.
- Confirmation and certificate. Each person confirms the instruction with signature, date and the result of the comprehension questions. Every passed instruction produces a certificate.
- Three languages. The Safety App runs in German, French and Italian, switchable per person.
- Visitors and contractors. At check-in in visitor management they confirm the safety instruction before entering the site.
Inspection rounds with the Suva checklists, measures, PPE and emergency organisation are in the same app. More on the page on safety instruction in the Safety App.
Frequently asked questions about safety instruction
How often must safety instruction be repeated?
The law does not prescribe a fixed interval. Art. 6 VUV requires instruction when an employee starts, whenever working conditions change significantly, and repetition where necessary. How often that is depends on the hazards and how often the task is performed. Many businesses repeat the basic instruction once a year.
Who may carry out safety instruction?
Responsibility always remains with the employer. It can be carried out by someone who knows the work, the hazards and the protective measures, usually the direct supervisor. Safety officers and KOPAS support and check effectiveness. Under Art. 19 ArGV 5, young workers must be instructed by a competent adult.
Does safety instruction have to be signed?
No, neither the VUV nor ArGV 3 requires a signature. You must, however, be able to show who was instructed on what and when. A confirmation by participants, on paper or digitally, is the usual way to do this. It becomes more meaningful when the result of a comprehension check is added.
Is online safety instruction permitted?
The law does not prescribe a form, but instruction must be adequate and appropriate. Digital instruction with comprehension questions works well for knowledge, rules and emergency procedures. Hands-on work with machines, putting on PPE and work involving particular hazards additionally need practical instruction on site.
Does safety instruction have to take place during working hours?
Yes. Art. 6 para. 4 VUV and Art. 5 para. 3 ArGV 3 state that information and instruction must take place during working hours and must not be at the employees’ expense. So plan fixed time in the working day for digital instruction too, rather than pushing it into the evening.
Does the duty to instruct also apply to temporary staff and contractors?
Yes. Art. 6 VUV explicitly includes employees of other businesses working on your premises. Under Art. 10 VUV you have the same duties towards hired-in workers as towards your own. Where several businesses work at the same place, Art. 9 VUV requires arrangements and mutual information about hazards and measures.
Your next step
You now know when, on what and how you must instruct and what reliable evidence contains. If you would like to try assignment, comprehension questions and certificates with your own content, you can test the Safety App free for 30 days.
This article gives an overview and does not replace legal advice. It is based on the VUV, ArGV 3 and ArGV 5 in the version published on fedlex.admin.ch and the Suva page on the ASA guideline, training, instruction and information, as of November 2026. For your individual case, please contact your industry solution, Suva or the labour inspectorate of your canton.
Want to see our articles more often in Google Search?
Add as a preferred source on Google

