Transition to ISO 9001:2026: A Roadmap for SMEs to the End of the Transition Period

Digital Airways·

Dashboard with a progress indicator at 75 percent and a trend line

Certified organisations must transition their quality management system to ISO 9001:2026 by 30 September 2029 at the latest. This is set by the mandatory transition requirements of Global ACI. The transition takes place during a surveillance audit, a recertification audit or a separate transition audit. For SMEs, a roadmap in six phases works well, from agreeing the approach with the certification body to the audit itself.

We have summarised what changes in substance in our article ISO 9001:2026, what changes for SMEs. This article is about the approach. When to transition, what to do in which order and what is assessed in the transition audit.

The Global ACI transition requirements

The rules for the transition are set by the Global Accreditation Cooperation, Global ACI for short, the worldwide association of accreditation bodies. On 16 September 2026, the day the standard was published, it released its transition requirements for ISO 9001:2026. The accompanying document TECH-3-TR 2029-09-30 is mandatory for the accreditation bodies that have signed the Global ACI arrangement and for the certification bodies they accredit.

Milestone Date
Publication of ISO 9001:2026 16.09.2026
Accreditation bodies ready to assess against the new edition 31.03.2027 at the latest
Certification bodies submit their transition declaration by 30.06.2027
Accreditation bodies decide on the transition of certification bodies by 30.09.2027
New and initial certifications to ISO 9001:2026 only from 31.03.2028
End of the transition period, ISO 9001:2015 certificates are no longer valid 30.09.2029

The transition period is three years. Global ACI justifies this with the large number of more than one million accredited ISO 9001 certificates worldwide. The document considers the changes themselves to be minimal and expects organisations to implement them with reasonable effort.

One point is often overlooked. A certification body may only issue a certificate to the new edition once its own accreditation has been transitioned. Accreditation bodies make these decisions by 30 September 2027 at the latest. A transition audit in early 2027 is therefore only possible if your certification body is ahead of schedule. Ask when it can audit and certify to ISO 9001:2026.

The right moment depends on your audit cycle

A certificate runs for three years, with a recertification audit at the start and two surveillance audits in between. The transition can be built into any of these audits. Which one is suitable depends on when your next audits are due.

Your situation Recommendation
Recertification in 2027 Transition with the recertification audit if the certification body has already transitioned by then. Otherwise in the first surveillance audit in 2028.
Recertification in 2028 Transition with the 2028 recertification audit. This leaves enough time for preparation and any corrections.
Recertification in 2029 Transition in the 2028 surveillance audit. A recertification audit shortly before 30.09.2029 leaves hardly any room for manoeuvre.
Initial certification planned Build directly to ISO 9001:2026. From 31.03.2028, no initial certificates to the 2015 edition will be issued.

The rule of thumb is not to rely on the last possible audit. If the certification body raises a nonconformity in the transition audit, you need time for corrective action before the certificate can be issued. And under the Global ACI rules, the certificate must be issued before 30 September 2029, not just the audit held.

If you do not transition, you keep your existing certificate only until the end of the transition period. Even if a certificate to the 2015 edition would normally run longer, it still ends on 30 September 2029. Global ACI explicitly allows certification bodies to bring the expiry date forward in this case.

The roadmap in six phases

Phase 1, clarify and obtain the standard

Call your certification body and clarify three things. From when it can certify to ISO 9001:2026, in which audit you will transition and whether additional audit time will be planned. Record the answer in writing. At the same time, obtain the standard. In Switzerland it is available from SNV, and DIN Media lists the German edition DIN EN ISO 9001:2026 with an issue date of November 2026. Inform top management. The most important change affects them directly.

Phase 2, gap analysis

In the gap analysis you compare your existing system clause by clause with the new edition. Global ACI lists the key changes in its own document, which is a good basis for your checklist.

  • Clause 5.1.1. Top management now promotes a quality culture and ethical behaviour. A note explains that both are reflected in shared values, attitudes and established practices.
  • Clause 5.2.1. The requirement that the quality policy takes into account the context of the organisation and supports its strategic direction now has its own item.
  • Clause 6.1. Restructured into determining risks and opportunities, actions to address risks and actions to address opportunities.
  • Clause 6.3. When changing the quality management system, you additionally plan how effectiveness will be monitored, how the change will be communicated and how the results will be reviewed.
  • Clause 7.3. Employees are additionally aware of the organisation’s quality culture and ethical behaviour.
  • Clause 9.3.2. The management review must now include the inputs, and changes in the needs and expectations of interested parties are added.
  • Annexes. Informative Annex A has been revised, Annex B has been removed.

In addition, you determine whether climate change is a relevant issue for your organisation. This comes from the 2024 amendment and is now a fixed part of the standard. For each point, record what is in place today, what is missing and who will close the gap.

Phase 3, action plan

Each gap becomes an action with a responsible person, a deadline and the evidence that shows it is complete. Plan backwards from the date of the transition audit. The internal audit and the management review must come first, and they take several weeks.

Phase 4, implementation

Most actions concern existing documents and processes. Extending the quality policy, managing risks and opportunities separately, expanding the template for changes to the quality management system and adding the new inputs to the management review template. Revised documents need proper approval, otherwise employees keep working with old versions.

Quality culture takes more time. It cannot be dealt with in a document. What counts in the audit is how it shows in everyday work, for example how errors are reported, how management responds to complaints and whether employees know the values that apply. Plan a short awareness session for all employees and record attendance.

Phase 5, internal audit and management review

Before the certification body arrives, check for yourself. Audit at least the changed clauses against the new edition. Suitable questions are in our question catalogue for the internal audit. Then hold a management review with the extended inputs. An example of structure and content is in our article on the management review to ISO 9001. Both are the strongest evidence that the transition has not only taken place on paper.

Phase 6, transition audit

In the audit you present the gap analysis, action plan, revised documents, audit report and management review. You handle findings as in any other audit, with root cause analysis and corrective action within the agreed deadline. After a positive decision, the certification body issues the certificate to ISO 9001:2026.

What is assessed in the transition audit

Global ACI specifies the minimum scope of the transition audit. It covers the changed requirements of ISO 9001:2026 compared with the previous edition, changes to your organisation’s context and whether any other changes to your quality management system are needed.

The audit may take place fully or partly remotely if the certification body can demonstrate that its objectives are met. Global ACI does not set a fixed amount of additional time. The certification body decides whether more audit time is needed, taking into account how much your system changes and whether the transition is combined with a regular audit. According to the document, a full system audit may not need additional time. Ask early how your certification body calculates it.

Common pitfalls

  • Starting too late. Anyone waiting until 2029 competes with many other organisations for audit dates and has no buffer for corrections.
  • Only swapping clause numbers. A quality manual with new references is not yet a transition. The auditor asks about actual practice.
  • Delegating quality culture to the quality manager. The standard addresses the requirement to top management. They must be able to answer for it in the audit themselves.
  • Treating opportunities as the opposite of risks. The new structure requires separate actions for opportunities, with their own effectiveness evaluation.
  • Keeping old templates. If the management review template is not updated, the new inputs are missing from the first report after the transition.
  • Not having the date confirmed. What counts is what your certification body confirms in writing.

How QuKI supports the transition

Most of the transition consists of actions, documents and evidence that need ongoing maintenance. QuKI, our AI-native QM software, manages them in one system instead of scattered files.

In document control to ISO 9001, every revised quality policy and every updated process description gets a version, validity, review date and four-eyes approval. In risk management you manage risks and opportunities in the risk matrix, with actions, deadlines and effectiveness review. Audit management plans the internal audit in the audit programme and tracks every finding through to the completed action, with the AI suggesting audit questions from your process documents. The management review brings together the key figures from all booked modules. You assign the employee awareness session in training management and document it with a comprehension test.

Frequently asked questions about the transition to ISO 9001:2026

When do I have to transition to ISO 9001:2026?

By 30 September 2029 at the latest. Under the Global ACI transition requirements, by that date not only must the transition audit have taken place, the new certificate must also have been issued. Your certification body may set earlier internal deadlines. Clarify the date early and have it confirmed in writing.

Can I combine the transition with a surveillance audit?

Yes. Global ACI allows the transition during a surveillance audit, a recertification audit or a separate transition audit. For most SMEs a regular audit is the most economical route. The certification body then additionally assesses the changed requirements and decides whether more audit time is needed for this.

When can I get certified to ISO 9001:2026?

As soon as your certification body is accredited for the new edition. Accreditation bodies make these decisions by 30 September 2027 at the latest, and some certification bodies are ready earlier. Ask directly from which date your certification body offers audits and certificates to ISO 9001:2026.

What happens if I do not transition in time?

Your ISO 9001:2015 certificate loses its validity on 30 September 2029, even if the certification cycle would otherwise run longer. After that, a new certification to ISO 9001:2026 is required. With customers who require a valid certificate, this can have consequences for ongoing orders.

How long does the transition to ISO 9001:2026 take?

That depends on the state of your system. Global ACI considers the changes minimal. Still, plan for several months, because the internal audit and management review must come before the transition audit and quality culture needs time. Plan backwards from the agreed audit date.

Do I need an external consultant for the transition?

No. Neither the standard nor the transition requirements call for a consultant. If you have a working quality management system to the 2015 edition, your own quality manager can carry out the gap analysis. Training on the new edition helps to ensure the changes are understood and implemented correctly.

Your next step

Would you like to manage the gap analysis, actions, documents and internal audit for the transition in one system? Try QuKI free for 30 days or let us show you the modules in a 30-minute demo based on your own processes.

The transition requirements are based on the document Global ACI-TECH-3-TR 2029-09-30 (M), version 1.0 of 4 September 2026, and the Global ACI announcement of 16 September 2026. The requirements of the standard are paraphrased, the text of the standard is binding. As of November 2026.

Want to see our articles more often in Google Search?

Add as a preferred source on Google